Plumbers Waynesburg PA use plumbing tools that are specialized to fit the job. Professional plumbing tools are designed to perform a wide variety of functions that include: measuring, accessing holes, cutting pipe, soldering tightening and loosening, and more. Below is a list of the kinds of tools plumbers use:
Level: Known as “levelness,” a level gives the plumber the ability to make adjustments in the slope of drain and waste pipes during vent, wast, and drain installation.
Hole Saw: The plumber will use the hole saw to cut large holes through wood, masonry, and metal. Toothed hole saws are used to cut through wooden items. The abrasive hole saws cut through masonry and metal. The hole saw can be used on water supply lines and ABS drain pipes.
Pipe Cutter: This cutter allows the plumber to cut copper water lines. A plumber will open the tool’s mouth, place the copper pipe in the mouth, and then tighten the cutting disc on the pipe’s surface. To slice the pipe, the plumber will turn the tool around the pipe repeatedly. Once it slices through the pipe, a clean cut remains which is ready to be sanded and soldered.
Soldering Torch: To use the soldering torch, a plumber opens the control valve, uses a spark to light the torch, and then holds the flame against joints between copper fittings and pipes.
Wrenches: Plumbers use a variety of different types of wrenches in order to tighten and loosen fittings. Pipe wrenches are used to tighten bigger parts of the piping and other types of fittings. Basin wrenches are used to tighten and loosen bolts that are places that are difficult to access.
Screwdrivers: Screwdrivers are used for tightening and loosening a variety of components such as hose clamps, faucet knobs, as well as changing washers, taking appliances apart, and performing other plumbing tasks.
Tubing Cutter: Plumbers will use tubing cutters to make clean and precise cuts in copper tubing. Pipe cutters utilize a sharp wheel that spins around the copper pipe and then embeds in the metal. The result is a precise and clean cut the entire way around the pipe. Joints and fittings can be sealed once the pipes have been cut.
Jigsaws: These saws are used to make cuts in older pipes so that a new section can be installed. Jigsaws make it easier to make cuts in pipes are in area with space restrictions and cutting pipes that are in close proximity to the floor or wall.
Sealants: Plumbers use different types of sealants. Plumber’s tape is used on the threads of plumbing pipes and other types of plumbing connections. Other sealants that plumbers will use are silicone caulking and putty compounds. The type they use depends on the type of repair job.
When you have a problem with your plumbing, a professional plumber is essential to ensuring the problem is repaired properly. Plumbers relies on a wide variety of plumbing tools for a variety of plumbing tasks and repair jobs. Each tool performs specific functions to ensure the job is completed efficiently.
